Techo-Bloc | Pro Tips

4 Types of Interlock in SRW Construction

Written by Sophie Rhéaume | Dec 15, 2017 2:31:23 PM

A look at the 4 types of interlock with segmental retaining wall systems.

 

 

In segmental retaining wall construction, there are 4 types of interlock:

  • Shear strength
  • Independent or dependent mechanical device
  • Void fill
  • Pattern

Here are additional details for each of them.

 

Shear strength

This is the block to block contact.

Using denser blocks makes a wall stronger.

The strength comes from each block sitting on top of each other.

Independent or dependent mechanical device

Techo-Bloc created clips and pins that come with its wall systems, which are independent mechanical devices.

They can be used for better alignment by sliding them into the back setting of the wall unit.

They provide the desired setback and tie these units together.

Void fill

Void fill interlock is obtained using ¾-inch angular stone.

This type of stone is less than 5% passing the 200 sieve.

They can be added behind the wall and into the cores of the units.

As an aggregate is woven through the units, it ties them together even more.

Pattern

The last type of interlock is pattern.

It is obtained by not lining up the bonds of the blocks while building the wall.

 

VIEW OUR SELECTION OF WALL BLOCKS AND BENEFIT FROM CROSS-SECTION EXPLANATIONS TODAY!